Combustion and Control Systems

← Back to articles

Riello 40 G20 Oil Burner: 95–213 kW Guide for Indian Industries

The Riello 40 G20 is the largest single-stage burner in Riello's 40 G series, with 95–213 kW output. See its specifications, versions, uses, sizing and spare parts.

The Riello 40 G20 is the largest single-stage (on/off) light oil burner in Riello’s 40 G series. It delivers 95 to 213 kW and burns about 8 to 18 kg of diesel per hour. Because of this higher output, it is the usual choice for bigger boilers, hot air generators, industrial ovens and dryers.

What is the Riello 40 G20 oil burner?

The 40 G series from Riello, Italy covers outputs from 12 to 240 kW. The G20 sits at the top of this range. It uses the largest body in the series, so it can handle a bigger nozzle and more combustion air than the G5 or G10.

Each burner is fired at the factory before dispatch. As a result, setup on site is mainly about choosing the right nozzle and adjusting air and pump pressure.

There are also related versions in the same size class:

  • G20S – single stage, with output up to 240 kW.
  • G20D and G20I – two-stage versions, 71/95 to 240 kW, for high and low flame operation.

Where is this burner used in industry?

With up to 213 kW of heat, this burner is a strong fit for:

  • Steam boilers and hot water boilers in factories, hotels and hospitals
  • Large hot air generators and space heating
  • Industrial ovens, including large rotary and tunnel-type baking ovens
  • Dryers for food grains, spices, textiles and chemicals
  • Thermic fluid heaters for process heating
  • Plants where diesel is the main or backup fuel

Riello 40 G20 technical specifications

BrandRiello (Italy)
Model40 G20
OperationSingle stage (on/off)
Heat output95 – 213 kW
Fuel delivery8 – 18 kg/h
FuelGas oil (diesel), viscosity 4 – 6 mm²/s at 20 °C
Related modelsG20S (up to 240 kW), G20D / G20I two-stage

How do you choose between the G10, G20 and two-stage models?

Start with the heat input your equipment needs. For example, a boiler that gives 180 kW at about 90% efficiency needs roughly 200 kW from the burner. That fits inside the G20 range.

Then use this simple guide:

  • Up to about 120 kW: the Riello 40 G10 oil burner is usually enough.
  • 95 to 213 kW: the G20 is the right single-stage choice.
  • Up to 240 kW: look at the G20S.
  • Need high and low flame for better temperature control? Ask about the two-stage G20D or G20I.

Not sure? Send us your boiler or oven nameplate photo on WhatsApp, and we will help you choose.

Which spare parts should you keep ready?

A big burner usually runs long hours, so a breakdown costs more. Keeping these parts in stock reduces downtime:

  1. Nozzle – replace when the flame turns smoky or uneven. See Riello oil burner nozzles.
  2. Photocell – the most common cause of lockout. See the Riello G5 / G10 / G20 photocell.
  3. Hydraulic jack – opens the air damper. See the Riello hydraulic jack 3006911.
  4. Control box – see the Riello 530SE control box.
  5. Ignition electrodes and oil filter – cheap parts that prevent many starting problems.

Buy Riello 40 G20 in Mumbai

Riello industrial oil and gas burners supplies this burner and its spare parts from Gala No. 204, B Block, Prime Trade Center, Waliv Phata, Sativali Road, Vasai (E) – 401208. We supply customers in Mumbai, Thane, Navi Mumbai, Pune, Gujarat and across India.

👉 WhatsApp us for the Riello 40 G20 price.

Frequently asked questions

What is the output of this burner?
It covers 95 to 213 kW, using about 8 to 18 kg/h of diesel.

What is the difference between the G20 and the G20S?
The G20S reaches a higher maximum output of 240 kW.

Is there a two-stage version?
Yes. The G20D and G20I are two-stage models in the same size class.

Which fuel does it need?
It is designed for gas oil (diesel) with a viscosity of 4 to 6 mm²/s at 20 °C.

How do I get the price?
WhatsApp us at +91 98197 08885 with your equipment details.

Scroll to Top