Combustion and Control Systems

← Back to articles

Riello 40 G10 Oil Burner: Specifications, Uses and Sizing

The Riello 40 G10 is a single-stage light oil burner with 54–120 kW output for medium boilers, ovens and dryers. See specifications, sizing, two-stage option and maintenance tips.

The Riello 40 G10 is a single-stage (on/off) light oil burner made in Italy, with an output of 54 to 120 kW. In simple terms, it is the step up from the small G5, built for medium boilers, hot water generators, ovens and dryers that need more heat while keeping a compact, easy-to-service design.

What is the Riello 40 G10 oil burner?

The G10 belongs to Riello’s 40 G series of one-stage light oil burners. This series runs from 12 kW at the smallest to 240 kW at the largest. The G10 shares its body size with the G7, but it covers a much wider output range.

Like every model in the series, it is fired at the factory before it leaves Italy. Therefore, your technician mainly needs to fit the right nozzle and set the air and pump pressure for your equipment.

Which equipment is it best for?

With up to 120 kW of heat, this burner suits a wide range of medium-duty jobs:

  • Hot water boilers and small to medium steam boilers
  • Hot air generators for factories and warehouses
  • Rotary ovens, deck ovens and industrial baking ovens
  • Dryers for food processing, textiles and laundries
  • Thermic fluid heaters
  • Process heating where piped gas is not yet available

Riello 40 G10 technical specifications

BrandRiello (Italy)
Model40 G10
OperationSingle stage (on/off)
Heat output54 – 120 kW
FuelLight oil / diesel
Two-stage version40 G10I (44/54 – 120 kW)
TestingEmissions measured as per EN 267

How do you pick the right size?

First, check the heat input your boiler or oven needs. It is usually on the nameplate in kW or kcal/h. For instance, a boiler that delivers 90 kW at around 90% efficiency needs about 100 kW from the burner. That sits comfortably inside the G10 range.

On the other hand:

  • If you need less than 60 kW, the smaller Riello 40 G5 oil burner (28–60 kW) is a better match.
  • If you need more than 120 kW, look at the larger Riello 40 G20 (95–213 kW).
  • If your process needs high and low flame, ask about the two-stage G10I.

Still unsure? Send your nameplate photo on WhatsApp, and we will confirm the right model before you buy.

Common problems and simple fixes

Most service calls on this burner come down to a few parts:

  1. Smoky or unstable flame: the nozzle is worn or the wrong size. Replace it with a correct Riello oil burner nozzle.
  2. Lockout after a few seconds: often a dirty or failed photocell. Clean it or fit a new Riello G5 / G10 / G20 photocell.
  3. Air damper not opening: check the hydraulic jack 3006911.
  4. No start at all: check the power supply, thermostat and the 530SE control box.

Buy Riello 40 G10 in Mumbai

Riello industrial oil and gas burners supplies this burner and genuine spare parts from Gala No. 204, B Block, Prime Trade Center, Waliv Phata, Sativali Road, Vasai (E) – 401208. We deliver across Mumbai, Thane, Navi Mumbai, Bhiwandi, Vasai-Virar and the rest of India.

👉 View the Riello 40 G10 product page or WhatsApp us for the price.

Frequently asked questions

What is the output of this burner?
It covers 54 to 120 kW.

Is there a two-stage version?
Yes. The G10I is the two-stage model in the same size class.

Which spare parts wear out most often?
The nozzle, photocell, ignition electrodes and oil filter need the most regular attention.

Can it replace an old burner on my boiler?
Usually yes, if the output and mounting match. Send us the old burner and boiler details to confirm.

How do I get the price?
WhatsApp us at +91 98197 08885 with your equipment details.

Scroll to Top