Looking for an oil burner in Mumbai? First decide which oil you will burn. Diesel (HSD) and LDO burners are simple light-oil burners for small boilers, ovens and heaters. Furnace oil burners, on the other hand, need a heated oil system, because furnace oil is too thick to pump and spray when cold. So pick the fuel first, then match the burner’s kW output to your machine.

We have worked with burners in Vasai (E) since 1996. Also, we supply oil burners and spares to factories across Mumbai, Thane, Bhiwandi, Vasai-Virar, Palghar and the MIDC areas. Here is a plain guide to choosing the right one.
Which oil burner in Mumbai suits my fuel: diesel, LDO or furnace oil?
The fuel decides almost everything: the pump, the nozzle, the heating and the price. In simple terms:
- Diesel (HSD) and LDO: light oils. According to the Bureau of Energy Efficiency, lighter oils don’t usually need pre-heating. So a standard pressure-jet burner works well.
- Furnace oil (FO): heavy oil. BEE notes it is hard to pump below about 25°C. Also, you must heat it to roughly 105°C at the burner tip to spray it properly.
Therefore, you can’t simply switch a diesel burner to furnace oil. Instead, furnace oil needs a burner and oil system built for it.
Diesel and LDO burners for small boilers and ovens
For most small and medium units, such as bakery ovens, small steam boilers, hot water generators, dryers and paint booths, a one-stage light-oil burner is the usual choice. In addition, it is compact and easy to set up and service.
For example, Riello’s 40 G series light-oil burners are all one-stage and run on a 230 V single-phase supply. Riello lists these ranges:
- Riello 40 G5: 28–60 kW
- Also, the Riello 40 G10: 54–120 kW
- Finally, the Riello 40 G20: 95–213 kW
In practice, choose the model whose range covers your machine’s rated heat input, not the biggest one you can afford. After all, an oversized burner switches on and off too often, wastes fuel and wears parts faster.
Furnace oil burners for boilers and furnaces
Many larger boilers and furnaces run on furnace oil. However, the whole system needs more care than a diesel set-up. Typically, it includes:
- Tank heating: first, steam coils or outflow heaters keep the oil pumpable.
- The right pump: also, heavy oil needs a positive displacement pump.
- A preheater: then the oil reaches the right thickness before the burner.
- Filters at every stage: finally, coarse strainers near the tank and finer ones near the burner.
For bigger loads, a modulating burner is usually better than a one-stage burner, because it follows the heat demand smoothly. So send us your load details, and we will suggest a suitable model.
What should I check before buying an oil burner in Mumbai?
Before you ask for a quote, keep these details ready. As a result, your supplier can suggest the right model the first time:
- First, the boiler, oven or furnace rating plate (heat input in kW or kcal/hr)
- Then your fuel: diesel/HSD, LDO or furnace oil
- Also, the old burner’s model and a photo of its plate, if you are replacing it
- Next, the combustion chamber size and mounting flange details
- In addition, the power supply at the burner (single-phase or three-phase)
- Finally, how many hours a day the machine runs
Spares for your oil burner in Mumbai: which parts wear out first?
Even a good burner needs a few parts replaced over time. For example:
- Nozzle: it wears and clogs, giving a poor flame and soot. See our guide to choosing a nozzle.
- Photocell: also, a dirty or weak flame sensor photocell causes lockouts.
- Ignition electrode: worn tips or the wrong gap mean hard starting.
- Pump filter and solenoid coil: finally, blocked filters and failed coils stop the oil flow.
So keep one set of these in stock. In fact, it costs far less than a full day of downtime.
Where can I buy an oil burner in Mumbai?
Riello industrial oil and gas burners, in Vasai (E), supplies Riello oil burners along with Ecoflam and Bentone burners. In addition, we supply oil burner nozzles, ignition transformers, photocells and Suntec pumps. So buyers from Mumbai, Thane, Navi Mumbai, Bhiwandi and Palghar can send their details on WhatsApp for model selection.
- Riello 40 G5, G10 and G20 light-oil burners for small boilers and ovens
- Also, Riello modulating heavy oil burners for larger boilers and furnaces
- As well as oil burner nozzles, photocells, ignition electrodes and Suntec pumps
- Finally, for today’s price and availability, message us on WhatsApp
Frequently asked questions
Can I use the same oil burner for diesel and furnace oil?
Usually not. Diesel and LDO burn in a standard light-oil burner. However, you must heat furnace oil before pumping and spraying it, so it needs a burner built for heavy oil.
Does an LDO burner need a preheater?
Usually not. According to BEE, lighter oils such as LDO don’t usually need pre-heating. Furnace oil, however, does.
Which oil burner in Mumbai is good for a small boiler or bakery oven?
A one-stage light-oil burner is common. For example, Riello lists the 40 G5 at 28–60 kW and the 40 G10 at 54–120 kW.
Why does my oil burner smoke or go into lockout?
Common causes are a worn nozzle, a dirty photocell, a choked pump filter or the wrong air setting. So check these parts before suspecting the control box.
Where can I buy an oil burner in Mumbai?
You can buy from Riello industrial oil and gas burners in Vasai (E). In addition, we supply oil burners and spares to buyers across India.
Need help choosing an oil burner?
Send a photo of your boiler or old burner plate on WhatsApp at +91 98197 08885, and tell us your fuel. Then we will suggest a suitable burner. Also, you can browse our range at www.oilburnernozzle.com.
Riello industrial oil and gas burners
Gala No. 204, B Block, Prime Trade Center, Waliv Phata, Sativali Road, Vasai (E) – 401208, Maharashtra
Find us on Google Maps