Siemens Burner Management System LMV26 / LMV36 / AGM60.A9 / AGG9

Combustion and control Systems Offering all types of Oil and Gas Burners Spare Parts, Boilers Spare parts including Siemens Burner Management Systems with AGM60 is a microprocessor-based burner control with matching system components for control and supervision of forced draft burners of medium to high capacity. For using of Oil Cum Gas Duel Fuel with 2 fuel actuators, AGM60 dual fuel switch unit is required. The LMV26 / LMV36 / AGM60.A9, Siemens AGG9 Single connectors

We Keep Following models in stock and supply worldwide 100% Genuine Siemens Germany Burner Controls with best lowest affordable prices;

Siemens Burner Management System Article no. BPZ:LMV26.300A2 Tyoe:  LMV26.300A2, 230 V AC, Suitable With Following Flame Detectors QRA2 /QRA2 M/ QRA4 U / QRA10C / QRA10CM/ QRB1 / QRC 1/ IONIZATION PROBE

Siemens Burner Management System Article no. BPZ:LMV26.300A2 Tyoe:  LMV26.300A2 is Suitable for Gas and Oil Burners With All models Flame Sensors.

Service Tolls OCI410 interface between burner management system and PC Article no.: BPZ:OCI410 Facilitates viewing and recording setting parameters on site with the help of the ACS410 software package.

Siemens Burner Management Systems OCI412.10 Modbus interface Article no.: BPZ:OCI412.10 Device serving as an interface between the LMV26 / LMV36 and a Modbus system, such as a building automation and control system (BACS). The Modbus interface is based on the RS-485 standard.

Siemens Germany ACS410 PC software Article no.: BPZ:ACS410 PC software for parameterization and visualization to the burner management system. See Software Documentation J7352.

Siemens Display and operating Unit AZL21.00A9 Article no.: BPZ:AZL21.00A9 Detached display and operating unit, choice of mounting methods, 8-digit LCD, 5 buttons, BCI for LMV26 / LMV36, degree of protection IP40.

Siemens Display and operating Unit AZL23.00A9 Article no.: BPZ:AZL23.00A9 Detached display and operating unit, choice of mounting methods, 8-digit LCD, 5 buttons, BCI for LMV26 / LMV36, degree of protection IP54.

Siemens QRA2, QRA2 M Flame detector for use with Siemens burner controls, for the supervision of gas flames and yellow- / blue-burning oil flames as well as ignition spark checking. Plastic housing, metalized to prevent static charging caused by the air flow from the fan. For direct mounting on the burner. The detectors can be supplied with or without securing flange and clamp.

Siemens QRA4U Flame detector for use with Siemens burner controls, for the supervision of gas flames and yellow- or blue-burning oil flames as well as for ignition spark proving.

Siemens QRA10C, QRA10MC Flame detector for use with Siemens burner controls, for the supervision of gas flames and yellow- / blue-burning oil flames as well as ignition spark checking. Die-cast aluminum housing with a 1 in. mounting coupling and connection facility for cooling air. The housing of this detector has a bayonet fitting which allows it to be secured either directly to the 1 in. mounting coupling or to the AGG06. The 1 in. mounting coupling can be screwed to a viewing tube or to the AGG07. The Pg cable gland can be removed and replaced, if some other detector cable shall be used.

Siemens QRB1 Photo resistive flame detector for use with Siemens burner controls, for the supervision of oil flames in the visible light spectrum. Especially suited for use with burner controls for small capacity burners in intermittent operation.

Siemens QRB3 Photo resistive flame detector for use with Siemens burner controls, for the supervision of oil flames in the visible light spectrum. Especially suited for use with burner controls for small capacity burners in intermittent operation. See Data Sheet N7714. QRB4 Yellow flame detector for use with Siemens burner controls, for the supervision of oil flames in the visible light spectrum.

Siemens QRB4 is used in connection with oil burner controls in intermittent operation.

Siemens QRC Blue-flame detector for use with Siemens burner controls, for the supervision of blue- or yellow-burning oil or gas flames. Especially suited for use with burner controls for small capacity burners in intermittent operation.

Siemens Burner Actuator Model SQM33.4 Rated torque 1.2 Nm (0.8 Nm holding torque when dead), running time 5 s, stepper motor, front mounting, D-type drive shaft.

Siemens Burner Actuator Model SQM33.5 Rated torque 3 Nm (2.6 Nm holding torque when dead), running time 5 s, stepper motor, front mounting, D-type drive shaft.

Siemens Burner Actuator Model SQM33.7 Rated torque 10 Nm (6 Nm holding torque when dead), running time 17 s, stepper motor, front mounting, D-type drive shaft.

Siemens Burner Actuator Model SQN1 Rated torque 1 Nm (0.2 Nm holding torque when dead), running time 5 s, stepper motor, front mounting, D-type drive shaft.

Siemens Connector set AGG3.131 Article no.: BPZ:AGG3.131 Complete connector set RAST2.5 / RAST3.5 / RAST5 for gas / oil applications, single pack.

Siemens Connector set AGG3.132 Article no.: BPZ:AGG3.132 Complete connector set RAST2.5 / RAST3.5 / RAST5 for gas- / oil applications, pack of 10.

Siemens Connector set AGG3.151 Article no.: BPZ:AGG3.151 Connector set for AGM60.1A9 (US), RAST5, set of 10 AGM60.1A9

Siemens Acessories AGG5.310 Article no.: BPZ:AGG5.310 Accessories set speed control, for burner management systems, composed of sensor disk  50, sensor and mounting set.

Siemens Cables AGV50.100 Article no.: BPZ:AGV50.100 Signal cable for AZL2, with RJ11 connector, length 1 Meter Long

Siemens Cables AGV50.300 Article no.: BPZ:AGV50.300 Signal cable for AZL2, with RJ11 connector, length 3 Meters Long.

Siemens Cables AGV61.100 Article no.: BPZ:AGV60.50 Connecting cable between LMV26 / LMV36 and AGM60, cable length 0.5 meter Long.

Siemens VKP Proportional controlling element for mounting between threaded flanges in gas trains for Oilon Oil and Gas Burners.

Siemens ASK33.1 Article no.: BPZ:ASK33.1 Larger mounting plate required to replace existing mounting plate. Required for mounting the actuators SQM4 or SQM33.

Siemens  ASK33.2 Article no.: BPZ:ASK33.2 Additional mounting plate is required for mounting the actuator SQN13.

Siemens Gas Burner damper for mounting kit KF41.xxxC Butterfly valves designed in intermediate flange design, for integration into gas trains.

Siemens Gas Burner damper for mounting kit  ASK33.4 Article no.: BPZ:ASK33.4 Mounting kit for mounting the actuators SQM33.5 on the butterfly valve VKF41.xxxC.

Siemens Burner Transformer A5Q20002669 Article no.: BPZ:A5Q20002669 Transformer to increase ionization voltage for AC 120 V