The Brahma EG12 SR GMO is a 1/2 inch, normally closed gas solenoid valve made in Italy. It opens to let gas reach the burner when its coil is powered, and it shuts off the gas automatically the moment power is cut. Because of this fail-safe action, it is a key safety part on gas burners for boilers, ovens, dryers and furnaces.

What is a gas solenoid valve used for?
Every gas burner needs a valve that the burner control can open and close electrically. When the burner starts and the control box is satisfied that it is safe, it powers the coil and the valve opens. If the flame fails, the power goes off and the valve closes at once.
In other words, the valve is the last line of defence between your gas supply and the combustion chamber.
Brahma EG12 SR GMO specifications
| Brand | Brahma (Italy) |
| Model / code | EG12 SR GMO / 13912001 |
| Connection | 1/2 inch (DN15) |
| Body | Die-cast aluminium |
| Type | Normally closed, fast opening (SR) |
| Coil | BE6 GMO, 230 V AC (code 18811000), included |
| Gases | Natural gas, LPG and town gas, as per Brahma specifications |
SR or L: what is the difference?
Brahma makes the EG12 in two main styles, and choosing the right one matters:
- SR (fast opening) – opens fully in about one second or less. It is common on smaller burners and on pilot or ignition gas lines.
- L (slow opening) – opens gradually, with adjustable flow, for a soft and quiet light-up on larger burners.
So always check your burner datasheet, or simply match the code on your old valve, before you order.
Where is this valve used?
You will find it on gas burners for:
- Industrial and commercial boilers
- Thermic fluid heaters
- Bakery ovens, powder coating ovens and dryers
- Furnaces and process heaters
For example, we supply it with the Riello 40 FS10 and FS20 gas burners and the Riello 40 FS5 gas burner.
What are the signs of a faulty gas valve?
- The burner tries to start but never lights, often because the valve does not open.
- A humming coil but no gas flow, which can point to a stuck plunger.
- A burnt or open-circuit coil, meaning no response at all when powered.
- Gas passing when the valve should be closed – stop the burner and replace the valve immediately.
Before replacing the whole valve, check the supply voltage and the coil. In many cases a new coil is enough. If you need a different size, see the Brahma E6G SR10 valve with spare coil.
See it on Instagram
We shared close-up photos of this valve, its coil and its box on Instagram. View the Brahma EG12 SR GMO post on Instagram.
Buy the Brahma EG12 SR GMO in Mumbai
Riello industrial oil and gas burners supplies Brahma gas solenoid valves and burner spare parts from Gala No. 204, B Block, Prime Trade Center, Waliv Phata, Sativali Road, Vasai (E) – 401208. We deliver across Mumbai, Thane, Navi Mumbai, Bhiwandi, Vasai-Virar and the rest of India.
View the Brahma EG12 SR GMO product page or WhatsApp us for the price.
Frequently asked questions
Is this valve normally open or normally closed?
It is normally closed, so it stays shut whenever the coil has no power.
Does it work with LPG?
Yes. It is rated for natural gas, LPG and town gas, as per Brahma specifications.
Is the coil included?
Yes. It comes with the BE6 GMO 230 V AC coil (code 18811000).
Can I replace only the coil?
Often yes, if the valve body is fine. Send us a photo of the coil label to confirm.
How do I get the price?
Message us on WhatsApp at +91 98197 08885 with your burner model or a photo of your old valve.