The Siemens SQN30.151A2700 is an electric servo motor (actuator) that opens and closes the air damper on oil and gas burners. In simple terms, it moves the damper between low flame and high flame. As a result, the burner always gets the right amount of air, the flame stays clean and the control box can finish its start-up checks.

Which burners use the Siemens SQN30.151A2700?
You will find this actuator on many European and Asian burners. For example:
- Oilon oil and gas burners
- Ecoflam BLU, Multicolor, Maior and Minor burners
- Also, Ecoflam Oilflam, Maxflam and Maxgas burners
- Bentone burners, as the air damper actuator
- Sookook and FBR burners
Still not sure it fits? Then send a photo of your old actuator’s label and your burner model on WhatsApp. We will confirm it before you order.
What are the specifications of the Siemens SQN30.151A2700?
| Specification | Value |
|---|---|
| Brand | Siemens |
| Type | Electric actuator for air dampers |
| Rotation angle | 90° |
| Running time (90°) | About 4.5 seconds at 50 Hz |
| Torque | 1 Nm |
| Switches | 2 relays, 1 auxiliary switch |
| Supply | AC 230 V |
| Direction | Anticlockwise (SQN30 series) |
For the full SQN3 range, see the Siemens actuator catalogue. However, always match the code on your old unit.
How do I know my burner servo motor has failed?
Look out for these common signs:
- The air damper doesn’t move, or it sticks at low or high flame.
- Your burner locks out during pre-purge, because the control box can’t confirm the damper position.
- The motor hums but doesn’t turn.
- Also, the flame is smoky or unstable at high fire.
In these cases, first check the wiring and the cam settings. Then, if the motor itself has failed, replace it with the same model.

Why replace it with the same Siemens SQN30.151A2700?
A matching model keeps the same rotation direction, running time, shaft and wiring. So your technician can fit it quickly and reset the cams without rewiring. On the other hand, a different SQN model may turn the other way or have a different switch layout. In that case, the burner may not start at all.
What is the difference between SQN30 and SQN31?
The main difference is the direction of rotation. According to Siemens, SQN30 actuators turn anticlockwise, while SQN31 actuators turn clockwise. Therefore, always replace like with like.
Where can I buy the Siemens SQN30.151A2700 in Mumbai?
You can buy the Siemens SQN30.151A2700 from our online shop. Or visit Riello industrial oil and gas burners in Vasai (E). In addition, we supply buyers in Mumbai, Thane, Bhiwandi, Vasai-Virar and Palghar, and we ship across India.
So, just send the model number or a label photo on WhatsApp at +91 98197 08885. Then we will share the price. Also, see our burner spare parts guide.
Frequently asked questions
What does the Siemens SQN30.151A2700 do?
It moves the burner’s air damper, so the right amount of air mixes with the fuel at low and high flame.
Which burners use this actuator?
For example, Oilon, Ecoflam, Bentone, Sookook and FBR burners use it.
What is the running time?
It turns 90° in about 4.5 seconds at 50 Hz.
Can I use a different servo motor instead?
Only if the direction, running time, torque, shaft and wiring all match. So the same model is the safest choice.
How can I get the price?
Send the model number or a label photo on WhatsApp. Then we will send a quick quote.
Contact us
Riello industrial oil and gas burners
Gala No. 204, B Block, Prime Trade Center, Waliv Phata, Sativali Road, Vasai (E) – 401208, Maharashtra
Find us on Google Maps